Home
Products
Saw Blades
Core Drill Bits
Grinding Tools
Vacuum Brazed Tools
Diamond Wires
Application
Concrete Wall / Concrete Slab Cutting
Road / Highway / Bridge / Airport Runway Sawing
Refractory Materials Cutting
Stone / Ceramic Cutting
Core Drilling
Floor Grinding
Geological Exploration / Engineering Quality Inspection
Blogs
About Us
Contact Us
BLOGS
Exhibition
Information
Select of diamond disk and attentions
In order to prevent the work layer from unusual damage, force, the compression operation should be avoided in the process of using diamond wheels. In non-cooling condition , it should not keep cutting the same positon. If the blade scalds, use it afer it becomes cool.
23 Mar,2010
Common Faults and exclusion method of drilling rig
Common Faults and exclusion method of drilling rig Motor does not turn Reason:Power unreasonable, or joint loosening Remedy:
06 Feb,2010
Stone cutting machine Common Faults and exclusion program
Stone cutting machine Common Faults and exclusion program:Motor does not turn Reason:The power block-up, joint loosening suggest :Repair the power supply, check all the connectors and tighten.
storage of saw blade
storage of saw bladeThe sawblade not to be used immediately should be put on the platform or hung on the special axle for storing saw blade。Standing against the wall is forbidden,in case of substrate
thin drilling bit manipulation attentions
thin drilling bit manipulation attentions:1)water drill. You must give it some water when it is working ,water drill apply in Dig a large core drilling project.the professor suggest that matched it wi
Message Inquiry
Welcome to leave a message, we will contact you in time!