Home
Products
Saw Blades
Core Drill Bits
Grinding Tools
Vacuum Brazed Tools
Diamond Wires
Application
Concrete Wall / Concrete Slab Cutting
Road / Highway / Bridge / Airport Runway Sawing
Refractory Materials Cutting
Stone / Ceramic Cutting
Core Drilling
Floor Grinding
Geological Exploration / Engineering Quality Inspection
Blogs
About Us
Contact Us
BLOGS
Exhibition
Information
Wall Sawing
Wall sawing employs a circular blade on a track-mounted machine. The track is attached to vertical walls or steep inclines or floors that will not permit the use of floor saws. Wall or track sawing is typically specified to cut precise dimensional door, vent and window openings. Straight as well as bevel cuts are possible with the wall saw. The wall saw is also an excellent choice for creating precise openings in any concrete structure.
15 Oct,2013
Operation Speed
25 Jul,2013
technological conditions for blade
Generally, all the new blade should be edged. If it is not edged, or the edge is not good, the blade can be edged by high abrasive material, like firebrick, soft sand-gravel etc. if it becomes blunt or slips when using, we also can use the same method to repair it. When operating , we should note follows thing:
18 Apr,2013
How to choose the saw blade reasonbly
Factor of physical dimension。Choosing the size and style of saw blade according to the quality and specification of cutting materials。For example,the diameter of round saw blade should be three times than the cut workpiece。At the same time,choosing the structural style of the saw blade according to the requirrment of machining accuracy 。It means to select narrow-slot or successive sawtooth saw blade when smooth cutting surface required or processing the thinner and fragile material,on the contrary,to select wide-slot saw blade when smooth cutting surface is not strictly required or cutting thicker material。
04 Jan,2013
The operating points of different tooth shape saw blade
Nodal Tooth Saw Blade is widely used,because of good heat radiation,continuous dried cutting,low stress and sharp。Continuous Normal teeth(Rim), in general use, it needs add some water when cutting(for some special examples,there should be some appropriate formulas),the characteristics of fabrications is that it can be more stable、when in coordination with some appropriate formulas,it also can be the special cutting disk for stones and tiles.
06 Sep,2012
Message Inquiry
Welcome to leave a message, we will contact you in time!