Home
Products
Saw Blades
Core Drill Bits
Grinding Tools
Vacuum Brazed Tools
Diamond Wires
Application
Concrete Wall / Concrete Slab Cutting
Road / Highway / Bridge / Airport Runway Sawing
Refractory Materials Cutting
Stone / Ceramic Cutting
Core Drilling
Floor Grinding
Geological Exploration / Engineering Quality Inspection
Blogs
About Us
Contact Us
BLOGS
Exhibition
Information
How to Saw Concrete
Sometime during the construction or remodeling of your home, you will need to breach a concrete barrier. Pipes or wires that need to cross the barrier will require you to saw the concrete before digging can begin. Sawing through concrete are labor-intensive tasks that require focus, physical ability, and a bit of know-how to get the job done right.
18 Nov,2013
WHAT IS A DIAMOND BLADE?
A diamond saw blade is a circular steel disc (core) with an edge of metal bonded diamond segments which act as cutting teeth. The edge of the diamond can have segmented, continuous rim or serrated diamond cutting sections. The blade core is usually, but not always, a ground flat, steel disc. Some cores have sound deadening features. Segmented blades are usually slotted (”gullets“) which provide more efficient cooling by allowing water or air to flow between the segments. Gullets also allow the blade to flex under cutting pressure. Most blade cores are leveled and tensioned at the factory for the specific rpm the blade will be operated at. Correct blade tension allows the blade to bend under cutting pressure and ”snap“ back into position. Diamond segments or rims are mostly composed of diamonds and metal powders. Diamonds used in blades are virtually always synthetic diamonds varying in size and toughness. In the manufacturing process, the metal powder and diamond grit mixture is hot pressed at high temperatures to form a solid metal alloy (called the bond or matrix) in which the diamond grit is retained. The segment or rim is slightly wider than the blade core to reduce cutting friction from the steel core. Several different manufacturing methods are used to assemble segmented diamond saw blades.
13 Nov,2013
How to Drill Concrete
Sometime during the construction or remodeling of your home, you will need to breach a concrete barrier. Pipes or wires that need to cross the barrier will require you to drill a hole through concrete. Drilling through concrete are labor-intensive tasks that require focus, physical ability, and a bit of know-how to get the job done right.
How Diamond Tools Work
A diamond saw blade is composed of a circular steel disk with segments containing the diamond that are attached to the outer perimeter of the blade. The diamonds are held in place by the segment, which is a specially formulated mixture of metal bond powders and diamond that have been pressed and heated in a sintering press by the manufacturer. The diamond and bond are tailor-made to the specific cutting application. The exposed diamonds on the surface of the segment do the cutting. A diamond blade cuts in a manner similar to how sandpaper cuts wood. As the blade cuts, bond tails are formed that trail behind each diamond. This bond tail provides mechanical support for the diamond crystal. As the blade rotates through the material, the diamonds chip away at the material being cut.
12 Nov,2013
Assessing Concrete Hardness Before Working
Metal-bond diamond polishing pads (hard-bond tools) are used for polishing soft concrete, while softer diamond matrixes (soft-bond tools) are used for polishing hard concrete. Before the advent of the scratch test, contractors wouldn't know the hardness of the floor surface so they generally started with a hard-bond tool and worked up to softer matrixes.Tools that achieve the best productivity and yield good life were used to start the polishing process. But this search could be costly in terms of labor and diamond tooling. Having a good estimate of concrete hardness beforehand greatly increases productivity.
Message Inquiry
Welcome to leave a message, we will contact you in time!